How to properly use wipers

1, ensure that the front part of the surface of the glass with water to wipe the windshield wiper is made from natural rubber, wipe the windshield in very dry conditions, will be due to excessive friction and abrasion of the rubber surface, thus affecting the cleaning effect, so we must ensure that the front glass surface to the presence of water use automobile windshield wiper.

2 clean the windshield wiper rubber strip and the glass on the surface of adhesion in auto wipers work before the need to clean out the glass surface and a wiper rubber strip attached to the impurities, because these impurities in the wiper work, increase the friction between the rubber and glass, thereby blocking injury rubber or scratch the glass surface, appear scraping is not clear phenomenon.

3, when the parking stand wiper blade wiper blade when parking will stand up, not to strip and glass contacts, especially the car without long-term state to set up the wiper blades, because parking between glue and glass surface will be covered with dust and impurities, when using the wipers, the dust, the impurities can be friction tape or scratch force glass surface, thus affecting the wiping effect; when the car parking, heat engine from the engine to the windshield cover upward between the evaporation, if not the wiper up will make the wiper blade accelerate aging.

4, daily cleaning of glass surface daily wash, remove the front glass attached to the surface of the oil or dirt, make the front glass surface clean without attachment, otherwise, resulting in a scraping blade attached in the process of beating in the front glass surface of the grease or dirt, make a sound phenomenon.

5, avoid chemical erosion such as glass water and chemicals will corrode the glue, glue to accelerate aging, so the windscreen should try not to use chemicals for cleaning, if used, have to be careful not to let the chemicals and rubber contact.

6, careful cleaning glue glue cleaning wipers to rinse with water or soft cloth graze, avoid using improper cloth or excessive force surface scratches or strip and strain effect.

maintain

Regularly check: check the wiper is very simple, some spray cleaning fluid, and then start the wiper, notice the action is smooth, hear if there is a 'scratch' sound, if any, said too much pressure to the glass wiper, then we must make appropriate adjustment. When the wiper Saowan one to two, to see whether there is water on the windshield, and observe whether it will leave scratches, if you see clearly what is said on the wiper wiper blade has been aging, should be replaced with new rubber strips.

Avoid long time: avoid long time exposure in the sun can make the wiper longer service life, a little car is very attention: there is dust on the glass, often only open the wiper sweep away sand trouble, this is very wrong, in fact it will greatly damage the wiper the glue and auto glass. So before you open, you may wish to spray a little cleaning liquid, of course, better artificial cleaning. Maintenance wiper also pay attention to the maintenance of the car's water spray system: add neutral, decontamination, lubrication cleaning agent; bad cleaning liquid will corrode the sprinkler system, wiper and car topcoat. Filling water in time to avoid the water spray motor no-load.

Away from oil: because there is oil on the glass after the water is easy to condense into water droplets, in addition to not, prone to fine water phenomenon. Similarly, the car windshield wiper or accidentally hit the oil, it will not wash clean rain. Although the wiper is placed on the windshield, but the daily maintenance, it is easy to turn a blind eye, if found on the glass with grease, wash the car when the best use of glass cleaning liquid wiper strip and glass.